PLANET FGSW-2620VM - Manual (Page 187)

User’s Manual of FGSW-Series
6.18 Power over Ethernet Commands
(FGSW-2612PVM/FGSW-2620PVM/FGSW-2620VMP4)
show poe Show System Power over Ethernet information
show poe status Show PoE port information
poe temperature-protection Enabling or disabling the PoE power supply over temperature protection
poe limit-mode Configure System PoE power limit mode information
poe enable Enabling or disabling the port POE injects function
poe priority Set port priority for the power supply management
poe maximum-power Enabling or disabling per port power output limit
This chapter will be described how to configure PoE feature by example of
FGSW-2620PVM since the operation of FGSW-2620VMP4 / FGSW-2612PVM is the
same with FGSW-2620PVM.
6.18.1 Display System PoE status
show poe
Description:
Show System Power over Ethernet information
Command Level
Global Configuration
Example:
Switch(config)# show poe
Maximum Available Power
System Operation Status
PoE Power Consumption
Usage Threshold
PoE Power limit mode
:190Watts
: on
: 55 watts
: 21%
: Port Priority
show poe status
Description:
Show per PoE port information
Command Level
Global Configuration
Syntax:
show poe status [<port-list>]
Parameters:
187