PLANET FGSW-2620VM User Manual
Page 139
User’s Manual of FGSW-Series
139
The page includes the following fields:
Object
Description
System PoE Admin Mode
Allows user to enable or disable PoE function, and it will affects all of PoE port.
PoE PSU Status
PoE PSU Status shows status of power supply for PoE output.
PoE Temperature Unit 1
Display the current operating temperature of PoE chip unit 1.
The unit 1 is in charge of PoE Port-1~Port-12
PoE Temperature Unit 2
Display the current operating temperature of PoE chip unit 2.
The unit 1 is in charge of PoE Port-13~Port-24
Temperature Threshold
Allows user to customize the temperature for reporting to system log if PoE
Temperature Unit value was over the Threshold.
Over Temperature Protection
Enable / Disable over temperature protection.
When the PoE temperature unit 1 / unit2 over 70 degree C then PoE power
budget will be changed by 3 segments, for example as following.
Over 70 Degree C power budget 180 Watts
Over 73 Degree C power budget 170 Watts
Over 76 Degree C power budget 160 Watts
Power limit mode
Allow to configure power limit mode of Web Smart Device. It can choose :
Total Limit
. Set limit value of the total POE port provided power to the
PDs.
Classification
: Deliver PoE power according to PD’s PoE power level.
Consumption
: Supply PoE power by real power consumption.
PoE Usage Threshold
Allows user to customize the PoE Usage Threshold value for reporting to
system log if PoE power usage was over the threshold.
Power Allocation
Show the total watts usage of PoE Switch.
PoE Function
Can enable or disable the PoE function.
Priority
Set port priority for the POE power management
It can choose the “port priority”, value is :
Critical
High
Low
High priority is “Critical”.
Device class
Class 0 is the default for PDs. However, to improve power management at the
PSE, the PD may opt to provide a signature for Class 1 to 3.
The PD is classified based on power. The classification of the PD is the
maximum power that the PD will draw across all input voltages and operational
modes. A PD shall return Class 0 to 3 in accordance with the maximum power
draw as specified by Table 4.1.
Current(mA)
It shows the PoE device current Amp.