PLANET FGSW-2620VM - Manual (Page 18)

User’s Manual of FGSW-Series
18
1.5 Product Specification
Product FGSW-2620VM
Hardware Specification
Hardware Version Version 3
10/100Mbps Copper Ports 24 10/ 100Base-TX RJ-45 Auto-MDI/MDI-X ports
1000Mbps Copper Ports 2 10/100/1000Base-T RJ-45 port
SFP/mini-GBIC Slots 2 SFP interfaces, shared with Port-25 and Port-26
Switch Architecture Store-and-Forward
Switch Fabric 8.8Gbps / non-blocking
Switch Throughput 6.547Mpps@64Bytes
Address Table 8K entries
Share Data Buffer 512Kbytes
Flash 4Mbytess
DRAM 16Mbytes
Maximum Frame Size 9K Bytes
Flow Control
Back pressure for Half-Duplex
IEEE 802.3x Pause Frame for Full-Duplex
LED
Power
Link/Activity (Green)
1000 LNK / ACT(Green)
10/100 LNK / ACT(Green)
Dimensions ( W x D x H) 440 x 200 x 44 mm, 1U height
Weight 1.87kg
Power Requirement 100~240V AC, 50-60 Hz
Power Consumption 25 Watts (Full load)
Operating Temperature Standard: 0 ~ 50 Degree C
Operating Humidity 10% to 95% (Non-condensing)
Storage Temperature -10 Degree C ~ 85 Degree C
Layer 2 Functions
Management Interface Telnet, Web Browser, SNMP v1, v2c
Port Configuration
Port disable / enable.
Auto-negotiation 10/100Mbps full and half duplex mode selection.
Flow Control disable / enable.
Bandwidth control and broadcast storm filter on each port.
Port Status Display each port’s speed duplex mode, link status, Flow control status and Auto