2 vlan mode: port-based, Show vlan mode, Vlan mode – PLANET FGSW-2620VM User Manual
Page 155
User’s Manual of FGSW-Series
modes. The default configuration is tag-based (802.1Q) VLAN. In the 802.1Q VLAN, initially, all ports on the switch belong
to default VLAN, VID is 1.
You cannot delete the default VLAN group in 802.1Q VLAN mode.
6.5.2 VLAN Mode: Port-based
Packets can go among only members of the same VLAN group. Note all unselected ports are treated as belonging to
another single VLAN. If the port-based VLAN enabled, the VLAN-tagging is ignored.
show vlan mode
Description:
Display the current VLAN mode.
vlan mode
Description:
Change VLAN mode.
Syntax:
vlan mode (disabled|port-based|dot1q)
Parameters:
(disabled | port-based | dot1q) specifies the VLAN mode.
Change the VLAN mode for every time, user have to restart the switch for valid value.
155