PLANET FGSW-2620VM - Manual (Page 164)

User’s Manual of FGSW-Series
164
6.7.5 TFTP Update Firmware
copy tftp firmware
Description:
Download firmware from TFTP server.
Syntax:
copy tftp firmware <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.
<remote-file> specifies the file to be downloaded from the TFTP server.
6.7.6 Restore Configure File
copy tftp
Description:
Retrieve configuration from the TFTP server. If the remote file is the text file of CLI commands, use the keyword
running-config.
If the remote file is the configuration flash image of the switch instead, use the keyword flash.
Syntax:
copy tftp <running-config | flash> <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.
<remote-file> specifies the file to be downloaded from the TFTP server.
6.7.7 Backup Configure File
copy tftp
Description:
Send configuration to the TFTP server. If you want to save the configuration in a text file of CLI commands, use the
keywordrunning-config. If you want to save the configuration flash image instead, use the keyword flash.
Syntax:
copy <running-config | flash> tftp <ip-addr> <remote-file>
Parameters:
<ip-addr> specifies the IP address of the TFTP server.
6.8 MAC limit
MAC limit allows users to set a maximum number of MAC addresses to be stored in the MAC address table. The MAC
addresses chosen to be stored in MAC address table is the result of first-come-first-save policy. Once a MAC address is
stored in the MAC address table, it stays in until it is aged out. When an “opening” is available, the switch stored the first