KEPCO MST Series - Manual (Page 44)

3-12
MST SERIES 061813
4. Issue commands from host computer to read back current.
5. Compare the read back current (step 4) to the measured current (step 3). Verify that mea-
sured current is equal to readback current within the acceptable range of ± 1 LSB (1/4096) of
I
MAX
. If the acceptable range is exceeded, adjust R52 until measured current is within ±0.5
LSB (1/8192) of read back current, repeating steps 1 through 5 as necessary.