beautypg.com

Figure 2-3. initial checkout setup, Initial checkout setup -4, See figure 2-3) – KEPCO MST Series User Manual

Page 22: E 2-3)

background image

2-4

MST SERIES 061813

NOTE: If the sequence in step 4, above, is reversed (i.e., a-c power applied to the Controller

first and MST power modules last), the operator must send an IEEE 488 Device Clear
command via the Host Computer prior to issuing other commands.

For proper time delays between commands refer to PAR. 3.1.2. For details on the CIIL or SCPI
commands, refer to the Instruction Manual for the applicable controller (see PAR. 1.4.1).

FIGURE 2-3. INITIAL CHECKOUT SETUP

See also other documents in the category KEPCO Power suppliers: