The computer will not start – Epson 2000 User Manual
Page 86
The Computer Will Not Start
The power light is on, but the computer does not start.
Place a bootable diskette in drive A and turn on the computer
again.
The computer does not start and the powerlight is not lit.
Make sure the power cord is securely connected to both the AC
inlet on the back panel and an electrical outlet.
The power cord is securely connected, but the computer
still does not start.
Check the electrical outlet for power. Turn off your computer
and unplug the power cord. Plug a lamp into the outlet and
turn it on.
You installed or removed system components, and now
your computer does not start.
Check to make sure you have reconnected all the internal and
external cables correctly.
You may have installed a SIMM incorrectly. If the system
doesn’t detect memory, it won’t start. Check that your SIMM(s)
are securely installed in their sockets.
Troubleshooting 5-3