Replacing the cover – Epson 2000 User Manual
Page 45
Replacing the Cover
When you are ready to replace the computer’s cover, follow
these steps:
1.
Make sure all the internal components are installed properly.
2.
Check all cable connections, especially those that might have
been loosened during your work.
3.
Make sure all cables are out of the way so they do not catch
on the cover.
4.
Insert the lip at the front of the cover between the front bezel
and the chassis of the computer and guide it straight down.
(See the illustration on page 3-3.)
5.
Replace the three cover retaining screws.
6.
Reconnect the computer to the monitor, printer, keyboard,
and any other peripheral devices you have. Then reconnect
the power cable to the back of the computer and to an
electrical outlet.
3-4
Installing and Removing Options