beautypg.com

Setting the jumpers – Epson 2000 User Manual

Page 48

background image

Jumper settings (continued)

Jumper

Jumper

number

setting

Function

J16

1-2 *

Enables the IDE hard disk drive controller

2-3

Disablesthe IDE hard disk drive controller

* Factory setting

** MS-DOS automaticaIly reassigns parallel and serial ports. Checkyour

MS-DOS manual for more information.

Built-in VGA jumper settings

Built-in VGA

Enable

Disable

* Factory setting

J1

J2

1-2*

1-2*

Off

Off

Note

To use an external display adapter in an expansion slot, you

must disable the built-in VGA adapter.

The jumpers listed in the preceding tables are the only jumpers

you may need to change. Other jumpers on the system board

are for service purposes only.

Setting the Jumpers

If you need to change any jumper settings, follow these steps:

1.

Refer to the illustration on page 3-5 to locate the jumpers.

2.

If there are any option cards installed in your computer, you

need to remove them to access the jumpers. See page 3-16.

Installing

and Removing Options

3-7