Epson 2000 - Manual (Page 108)

IDE hard disk drive jumper settings
Model number Slave drive Single drive
C/D jumpered
C/D jumpered
C/D jumpered
C/D jumpered
C/D jumpered
C/D jumpered
C/D jumpered
DS jumpered
DS jumpered *
No jumpers
No jumpers
No jumpers
Masterdrive
C/D jumpered
C/D, DSP jumpered
C/D jumpered
C/D jumpered
C/D jumpered
C/D jumpered
C/D jumpered
DS, jumpered or
DS jumpered
SP and DS jumpered
MA jumpered
MA jumpered
MA jumpered
ConnerCP30084E No jumpers
ConnerCP30104H No jumpers
ConnerCP30174E No jumpers
ConnerCP30254 No jumpers
ConnerCP30344 No jumpers
ConnerCFS420A No jumpers
Conner CFA540A No jumpers
Quantum ELS170AT No jumpers
Quantum LPS240AT No jumpers*
Western Digital AC1170 SL jumpered
Western Digital AC2250 SL jumpered
Western Digital
AC2340
SL jumpered
* CS(cable selection) can also be jumpered for any configuration. When
CS issued, the drive is a master if pin 28 is grounded or a slave if pin 28 is
not grounded.
DMA Assignments
Level Assigned device
DMA0 Reserved (8-bit)
DMA1 Reserved (8-bit)
DMA2 FDD controIler (8-bit)
DMA3 Reserved (8-bit)
DMA4 Cascade for DMA2
DMA5 Reserved (16-bit)
DMA6 Reserved (16-bit)
DMA7 Reserved (16-bit)
Specifications A-11