Removing simms – Epson 2000 User Manual

Page 52

Push the SIMM into the socket until it is seated firmly in the

slot. Then tilt it upright, as shown above, guiding the hole
at each end of the SIMM over the retaining post at each end

of the SIMM socket. If it does not go in smoothly, do not

force it; pull it all the way out and try again.

Repeat steps 4 and 5 for each additional SIMM.

Replace any option cards you removed. (See page 3-13 for
instructions.)

Removing SIMMs

If you need to remove SIMMs from your computer (to install
different ones, for example), follow the steps below:

Remove any option cards that may be blocking your access

to the SIMM sockets. (See page 3-16 for instructions.)

Installing and Removing Options

3-11