TA Triumph-Adler DC 2325 - Manual (Page 49)

FAX Operation (Basic)
OPERATION GUIDE 3-17
3
7 Enter the destination name to be displayed on the Address Book, and
press [OK]. Up to 32 characters can be entered.
NOTE: For details on character entry, refer to Character Entry Method on
page 2 of the Appendix.
8 Press [Address].
9 Use [S]/[T] to select FAX.
10 Press [Change Dest.].
11 Use the numeric
keys to enter the
number of the
receiving system.
NOTE: Up to 32 digits can be entered as the number of the receiving
system.
Press [Space] to enter a space.
Use [W] or [X] to move the cursor.
To correct the fax number, press [Back Space] on the touch panel, and
delete the digits one by one before reentering the fax number. To delete
the number entirely, press the Clear key on the operation panel.
[Pause]
Pressing this key adds about three seconds of waiting time during dialing.
For example, when dialing the receiving system on an external line, you
can use this method to insert a pause before resuming dialing after you dial
a specific number.
12 Press [Sub Address]. When you do not use sub address communication,
go to step 16.
Status 10/10/2007 10:00
Cancel OK
Pause
Address - FAX No. Entry
Sub Address
Transmission
Start Speed
ECM
Encrypted
Transmission
Back Space Space
Add a new FAX destination.
Enter FAX number with numeric keys.