TA Triumph-Adler DC 2325 - Manual (Page 43)

FAX Operation (Basic)
OPERATION GUIDE 3-11
3
FAX Automatic Reception
When using this machine as a FAX-dedicated machine that does not
receive telephone calls, set the machine to FAX-dedicated reception. No
special operation is required when receiving faxes.
NOTE: When you are receiving DRD service from a telephone company,
change the reception method to [Auto (DRD)]. For details, refer to DRD
Reception (Available for inch versions only) on page 6-14.
Reception Method
This machine allows the following five reception methods.
• Auto (Normal)
• Auto (FAX/TEL) (Refer to page 6-2.)
• Auto (TAD) (Refer to page 6-4.)
• Auto (DRD) (Refer to page 6-14.)
• Manual (Refer to page 4-12.)
Checking and Changing the Reception Method
1 Press the System
Menu key.
2 Press [FAX/i-FAX], [Next] of Reception, [Next] of FAX, and then [Change]
of RX Setting.
3 Select [Auto (Normal)].
4 Press [OK].
5 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Reception Starts
1 When a fax has been sent to you, the machine rings the registered number
of times, and then starts receiving the fax.
After reception has started, the Receive indicator blinks.
30/40/50 ppm model 25 ppm model