TA Triumph-Adler DC 2325 - Manual (Page 179)

Setup and Registration
OPERATION GUIDE 6-27
6
NOTE: Set the same characters for the numbers indicated by the same
letter in parentheses. For example, the same characters should be used
as the encryption key (C) in both the sending and receiving systems.
Registering an Encryption Key
An encryption key is required when registering the Address Book used for
encryption communication (the other party is directly entered using the
numeric keys) in the sending system and when setting encryption in the
receiving system.
For the creation of the encryption key, numbers from 0 to 9 and letters from
A to F are arranged to form 16 numbers and/or letters arbitrarily. The
encryption key created is registered by adding a 2-digit key number from
01 to 20.
NOTE: Up to 20 encryption keys can be registered.
1 Press the System Menu key.
2 Press [FAX/i-FAX], [Next] of TX/RX Common and then [Register/Edit] of
Encrypt. Key Registration.
3 Select the
unregistered
encryption key and
press [Register/
Edit].
4 Press [Encryption
Key].
5 Use the numbers (0 to 9) and the alphabet (A to F) on the touch panel to
enter the encryption key (16 digits) and press [OK].
Status
FAX - Encrypt . Key Registration
10/10/2007 10:00
Register a key to use for encrypted FAX transmissions. (Up to 20 keys can be registered.)
Register
/Edit
Delete
Encryption Key
Key02
1/4
Key01
Key03
Key04
Key05
Close
Status
FAX - Add
Register or modify encryption key.
Enter 16 characters using the numbers 0-9 and the letters A-F.
Cancel OK
10/10/2007 10:00
Encryption Key