TA Triumph-Adler DC 2325 - Manual (Page 40)

FAX Operation (Basic)
3-8 OPERATION GUIDE
1 To change the
resolution,
press [Color/
Image], and
then [Scan
Resolution].
NOTE: You can see a preview of the image to be sent by pressing
[Preview]. For details, refer to Previewing Images on page 3-33.
2 Select the
resolution.
3 Press [OK].
IMPORTANT:
• If you select a high resolution, the image becomes clearer. However,
the higher the resolution is, the longer the send time is.
• When you send originals at a resolution of 200 × 400 dpi (Super Fine)
or higher, the fax machine on the receiving system needs to be
capable of receiving the originals at such image quality. When the
receiving system does not have such capability, originals are sent at
an image quality of 200 × 200 dpi (Fine).
Selecting the Density
6 Adjusting the density when scanning originals
• Manual (-3 to +3): You can adjust the density using seven levels or 13
levels.
• Auto: The optimal density is chosen according to the density of the
originals.
Status 10/10/2007 10:00
Color/Image Advanced
Setup
Type of Original/
Transmission
Ready to send.
Original
Zoom
Send
Sending Image
Destination
Density
Quick Setup Destination
Original
Image Scan
Resolution Color
Selection
Sharpness Background
Density Adj.
100%
Letter
:
:
: Letter
1
Change Setting
Status 10/10/2007 10:00
Cancel OK Add Shortcut
Ready to send. Destination
Select fineness of scanning resolution.
The larger the number, the better the
image resolution.
600x600dpi 400x400dpi
Ultra Fine 300x300dpi
200x400dpi
Super Fine 200x100dpi
Normal 200x200dpi
Fine
Scan Resolution
1
Press [OK] to display
the image.