TA Triumph-Adler DC 2325 - Manual (Page 162)

Setup and Registration
6-10 OPERATION GUIDE
Receiving Mode
The following five receiving modes are available.
• FAX Automatic Reception [Auto (Normal)]
• FAX/TEL Auto Switch Reception [Auto (FAX/TEL)] (Refer to page 6-4.)
• FAX/Answering Machine Auto Switch Reception [Auto (TAD)] (Refer to
page 6-4.)
• DRD Reception [Auto (DRD)] (Refer to page 6-14.)
• Manual Reception [Manual] (Refer to page 4-12.)
Select the mode appropriate for the way the machine is used.
NOTE: DRD reception mode is available only for inch models.
1 Press the System Menu key.
2 Press [FAX/i-FAX], [Next] of Reception, [Next] of FAX and then [Change]
of RX Setting.
3 Select the reception mode to be changed.
When [Auto (DRD)] is selected, choose the pattern of ringing.
4 Press [OK].
5 To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Pattern Description
Pattern 1 Normal Ring
Pattern 2 Double Ring
Pattern 3 Short-Short-Long
Pattern 4 Short-Long-Short