Setting the tti information, Setting the tti information -4, Preparation before use 2-4 operation guide – TA Triumph-Adler DC 2325 User Manual
Page 30: Press the system menu key, Press [ok
Preparation Before Use
2-4
OPERATION GUIDE
Setting the TTI information
Register the name (local FAX name), fax number, and local FAX ID printed
in the transmit terminal identification (TTI) area.
By registering the TTI data, the receiver can easily find out where the FAX
came from.
Local FAX Name Registration
Register the local FAX name printed on in the transmit terminal
identification.
NOTE:
To change the entry, follow the same operation.
1
Press the System Menu key.
2
Press [FAX/i-FAX], [Next] of Transmission, [Next] of Basic, and then
[Change] of Local FAX Name Entry. The entry screen will be displayed.
3
Enter the Local FAX
Name to be
registered. Up to 16
characters can be
entered.
NOTE:
For details on character entry, refer to Character Entry Method on
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Local FAX Information Entry
Register the local FAX information (local FAX number/ID) printed on in the
transmit terminal identification (TTI) area. The Local FAX ID is used for
transmission limit purposes. (Refer to Transmission Restriction on page 6-
16.)
NOTE:
If you install the Dual FAX option and then use 2 phone lines, you
can register Local Fax Numbers for each of the lines.
To change the registration contents, follow the same operation.
Use the keyboard to enter.
Limit: characters
Backspace
z
Lower-case
No./Symbol
Space
Cancel
OK
x
c
v
b
n
m
.
/
;
l
,
·
k
j
h
f
d
g
s
a
p
o
[
i
u
y
r
e
t
w
q
]
0
9
-
8
7
6
4
3
5
2
1
=
`
Upper-case
Status
6/6/2006 10:00
Input: characters
0
16
Local FAX Name Entry
L
K
I
J