TA Triumph-Adler DC 2025 - Manual (Page 94)

CHAPTER 6 FUNCTIONS
6-20
1
Inch specifications
Metric specifications
2
Inch specifications
Metric specifications
3
• Silent mode
The copier can be switched to the silent mode, which stops the
motor inside the copy machine immediately after copying has
been finished.
When “On” is selected, the motor stops immediately after copy-
ing has been finished.
Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)
Select “Silent mode” in the setting item list at the left-
hand side of the screen, and then touch the [Change #]
key.
The “Silent Mode” screen will appear.
To use the silent mode, touch the [On] key.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
• Management code change
Change the pin code that gives you access to the various default
settings and management.
IMPORTANT
• If you do change the management pin code, however, be sure
to keep a note of the new code. If you do happen to forget the
pin code, consult your sevice representation.
Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)
Select “Management code change” in the setting item
list at the left-hand side of the screen, and then touch
the [Change #] key.
The “Management code change” screen will appear.
Enter the new management code by using the numeral
keys.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Machine default” screen.
1
Inch specifications
Metric specifications
2
Inch specifications
Metric specifications
3
4
5