TA Triumph-Adler DC 2025 - Manual (Page 92)

CHAPTER 6 FUNCTIONS
6-18
• Select copy output mode (optional)
Select whether to eject copied paper to copier or either the docu-
ment finisher or job separator.
Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)
Select “Select Copy output mode” in the setting item list
at the left-hand side of the screen, and then touch the
[Change #] key.
The “Select copy output mode” screen will appear.
Select which to eject copied paper: the inner tray, job
separator, document finisher main tray or document fin-
isher sub tray.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications
2
• Select FAX output mode (optional)
Select where to eject facsimile paper: the inner tray, job separa-
tor, document finisher or mailbox.
Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)
Select “Select FAX output mode” in the setting item list
at the left-hand side of the screen, and then touch the
[Change #] key.
The “Select FAX output mode” screen will appear.
Select where to eject facsimile paper: the inner tray, job
separator, document finisher or mailbox.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
3
4
5
Inch specifications
Metric specifications
Inch specifications
Metric specifications
2