TA Triumph-Adler DC 2025 - Manual (Page 62)

CHAPTER 5 FUNCTIONS
5-30
Touch the [On] key.
Press the [Start] key.
Scanning will start.
When originals are set in the Document Processor, copy-
ing will start after scanning the set originals.
When an original is set on the platen, a message for
scanning the next original appears. Go to the next step.
Replace the original and then press the [Start] key.
Scanning will start.
When all originals are scanned, touch the [Scanning fin-
ished] key. Copying will start.
This function enables you to scan different sets of originals into
memory at different times and then copy them all at one time. A
large number of originals can be copied at one time by scanning
all of the originals of the same size or type as an individual job
and then storing each of those jobs.
Set the original.
Touch the [Function] key.
The Function screen will appear.
Touch the [Batch Scanning] key.
The “Batch scanning” screen will appear.
18. Copying large number of originals in one batch [Batch scanning]
4
Inch specifications
Metric specifications
3
Inch specifications
Metric specifications
5
6
7
A B C
C
B
A
1
Inch specifications
Metric specifications
2
Start
Stop/
Clear
Reset
1 2 3
4 5 6
7 8 9
0
→ →