TA Triumph-Adler DC 2025 - Manual (Page 58)

CHAPTER 5 FUNCTIONS
5-26
Set the originals.
Set the transparencies in the multi-bypass tray.
IMPORTANT
• Fan out the transparencies at least once before setting them.
• Up to 25 transparencies can be loaded into the multi-bypass
tray at one time.
• Make sure that paper of the same size and orientation as the
transparencies is loaded in one of the drawers or decks.
Touch the [Function] key, and then the [ Down] key.
The next page of the Function screen will appear.
15. Feeding paper as a backing sheet for transparencies
[Transparency + backing sheet modes]
When 2 or 3 transparencies are stacked on top of one another,
static electricity can cause problems. This mode automatically
place a backing sheet between the transparencies during copy-
ing for easy handling. Copying onto the backing sheet from the
same original and multiple copies are possible.
IMPORTANT
• Transparecies must be fed from the multi-bypass tray.
• Copying onto the backing sheet
The originals will be copied onto the transparencies and then the
same originals will be copied onto the backing sheets as well.
(The asterisks in the illustration indicate the transeparencies.)
• Leaving the backing sheet blank
The originals will be copied onto the transparencies and the back-
ing sheet will be left blank. (The asterisks in the illustration indi-
cate the transparencies.)
1
Inch specifications
Metric specifications
3
B
A
3
2
1
3
3
2
2
1
1
3
2
3
2
1 1
2