TA Triumph-Adler DC 2025 - Manual (Page 23)

CHAPTER 3 HOW TO LOAD PAPER
3-5
Remove the cap from the grid cleaner.
Attach the grid cleaner to the machine body aligning with
the notches.
Gently pull the electrostatic section as far as it will go,
push and pull it several times, and then push it back in.
Remove the grid cleaner and replace the cap.
Fit the new waste toner box into the copier.
Grasp the handle on the toner container and insert the
toner container along the rail of the printer.
Hold the toner container by hands and fully insert it into
the printer.
Remove the waste toner box.
Close the opening of the waste toner box with its seal.
CAUTION
Do not incinerate toner and toner containers. Dangerous
sparks may cause burn.
6
8
9
10
7
11
12
13
14