Making copies with clean edges [border erase mode, Chapter 5 functions – TA Triumph-Adler DC 2025 User Manual

Page 40

CHAPTER 5 FUNCTIONS

5-8

(1) Erasing blemishes from edges of copies (Sheet

Erase)

Use for erasing shadows, lines, etc., that occur around the edges
of copies made from sheet originals. (The

in the illustration

indicates the erasing border.)

(Inch specifications)

• The erasing border width can be selected from 0", 1/8", 1/4",

3/8", 1/2", 5/8" and 3/4".

(Metric specifications)

• The erasing border width can be selected between 0 mm and

18 mm.

NOTE

• The initial value of the erasing border width can be set. (See

“Default erase width” on page 6-31.)

(2) Erasing blemishes from the edges and middle

of copies made from books (Book Erase)

Use for making neat copies from thick books.
(The

in the illustration indicates the outer border (Border) and

the

indicates the center border (Center).)

(Inch specifications)

• The Border width can be selected from 0", 1/8", 1/4", 3/8", 1/2",

5/8" and 3/4".

• The Center width can be selected between 1/8" and 1 1/2" in

increments of 1/8.

(Metric specifications)

• The Border width can be selected between 0 mm and 18 mm.
• The Cener width can be selected between 0 mm and 36 mm.

NOTE

• The initial value of the erasing border width can be set. (See

“Default erase width” on page 6-31.)

Set the original(s).

Touch the [Function] key.
The Function screen will appear.

Touch the [Border erase] key.
The “Border Erase” screen will appear.

4. Making copies with clean edges [Border erase mode]

Inch specifications

Metric specifications

Inch specifications

Metric specifications

abcdefghijk

This manual is related to the following products: