TA Triumph-Adler DC 2025 - Manual (Page 108)

CHAPTER 6 FUNCTIONS
6-34
Touch the [Print form] key.
The “Enter the administrator number” screen will appear.
Enter the 4-digit management pin code “2500” for Copi-
ers with a copy speed of 25 copies per minute or “3500”
for Copiers with a copy speed of 35 copies per minute
by using the numeric keys.
The “Print report menu” screen will appear.
NOTE
• The 4-digit management pin code can be changed. (See “Man-
agement code change” on page 6-20.)
3. Print Form
Output the counter report by following the steps as shown.
Report Contents
Outputs the list of the default values selected in the Copy Default
Setting.
Outputs the list of the default values selected in the Machine
Default Setting.
Outputs the average copy density (black ratio (%) ) for each print
size of the copy, printer or FAX function.
NOTE
• Make sure 11" ✕ 8 1/2" or A4 size paper is set in the drawer. If
not, set it. When the wrong paper is set, the paper selection
screen will appear before the start of copy.
Press the [ ] (Default setting) key on the control panel.
The “Default setting menu” screen will appear. 2
1
3
4
Inch specifications
Metric specifications
Inch specifications
Metric specifications
Inch specifications
Metric specifications
Stop/
Clear
Reset
Interrupt Management En
Selection
1 2 3
4 5 6
7 8 9
→ →