TA Triumph-Adler DC 2025 - Manual (Page 116)

CHAPTER 7 OPTIONAL EQUIPMENT
7-4
After all the originals have been scanned, press the
[Scanning finished] key.
Copying will begin and finished copies will be ejected
face down onto the tray with each full set shifted slightly
from the previous one.
Remove all of the finished copies from the tray.
2 2 2 2 2 Copying in Sort:OFF mode
This mode automatically groups copies made from multiple origi-
nals, with all the copies produced from an individual original
stacked together in one set.
Press the [Sort/Finish] key.
The “Sort/Finished” screen will appear.
Press the [Sort:OFF] key.
Press the [One page per file] key.
Press the [Close] key. The message display returns to
the Function screen.
Set the originals to be copied.
Press the [Start] key. Scanning of the originals will start.
The number of scanned originals will be displayed.
NOTE
• Repeat this operation for all originals when using the platen.
After all the originals have been scanned, press the
[Scanning finished] key.
Copying will begin and finished copies will be ejected
face down onto the tray with each full set shifted slightly
from the previous one.
Remove all of the finished copies from the tray.
3 3 3 3 3 Copying in the Staple mode
This mode automatically staples each copy set.
Press the [Sort/Finish] key.
The “Sort/Finished” screen will appear.
Press the [Staple mode] key.
The staple mode set-up screen will appear.
Press the key that corresponds to the desired stapling
style.
* Stapling will be accomplished as shown in the illustra-
tion (as viewed from the front of the copies).
Set the originals to be copied. Check the direction of the
original top side.
1
2
3
4
5
6
7
8
1
2
3
4
A A
A A A
A
7
8
Inch specifications
Metric specifications
Inch specifications
Metric specifications
Inch specifications
Metric specifications