TA Triumph-Adler DC 2025 - Manual (Page 91)

CHAPTER 6 FUNCTIONS
6-17
• Auto shut-off time
Select the length of time that you want to elapse - when the copier
is not used -before the auto shut-off function automatically turns
the power to the copier OFF.
Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)
Select “Auto shut-off time” in the setting item list at the
left-hand side of the screen, and then touch the [Change
#] key.
The “Auto shut-off time” screen will appear.
Touch the [+] key or [–] key to select auto shut-off time
after done copying or last settings.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
• Auto preheat time
Select the length of time that you want to elapse – after copying
ends – before the energy-saving auto preheat function is engaged.
Display the “Machine default” screen. (See (2) Access-
ing the machine default setting mode.)
Select “Auto preheat time” in the setting item list at the
left-hand side of the screen, and then touch the [Change
#] key.
The “Auto preheat time” screen will appear.
Touch the [+] key or [–] key to select auto preheat time
after done copying or last settings.
NOTE
• To cancel the settings, touch [Back] key. The display will return
to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Machine default” screen.
Touch the [Close] key.
The display will return to the “Default setting menu”
screen.
1
Inch specifications
Metric specifications
2
Inch specifications
Metric specifications
3
4
5
1
Inch specifications
Metric specifications
2
Inch specifications
Metric specifications
3
4
5