TA Triumph-Adler DC 2025 - Manual (Page 37)

CHAPTER 5 FUNCTIONS
5-5
Press the [Start] key.
Scanning will start.
When originals are set in the Document Processor, copy-
ing will start after scanning the set originals.
When an original is set on the platen, a message for
scanning the next original appears. Go to the next step.
Replace the original and then press the [Start] key.
Scanning will start.
When all originals are scanned, touch the [Scanning fin-
ished] key. Copying will start.
Specify the type of the originals.
The original selection keys will appear.
Touch the [2 sided ➝ 1 sided] or [Book ➝ 1 sided] key ac-
cording to the type of the originals.
Specify the binding orientation of the originals.
Check the orientation of originals according to the mes-
sage.
IMPORTANT
• If the orientation of the originals is incorrect, it may result in
wrong finished copies.
4 8
7
5
6
Inch specifications
Metric specifications
2-sided originals 2-page (open-face) originals
2-sided originals 2-page (open-face) originals
9
10
Start
Stop/
Clear
Reset
2 3
4 5 6
7 8 9
0 → →
Inch specifications
Metric specifications
2-sided originals 2-page (open-face) originals
2-sided originals 2-page (open-face) originals
Metric specifications
Inch specifications