TA Triumph-Adler DC 2025 - Manual (Page 120)

CHAPTER 7 OPTIONAL EQUIPMENT
7-8
(9) Job separator
When using the optional printer function, the paper eject point
can be changed according to the used function, making it easier
to sort paper.
Copied paper can be ejected to the job separator (upper sec-
tion). See “Select copy output mode” in Machine default setting
on page 6-18.
* The job separator can store up to 100 copies. When making
101 or more copies, copying will stop when 100 copies are made.
Copying will resume automatically when the copied sheets are
removed.
(10) Key counter
The key counter determines the number of copies that have been
made. It is useful for copier centralized management on a de-
partment or even company level.
* The key counter may count up when either data from a com-
puter is printed out or fax pages are printed out.
• Setting the key counter
Insert the key counter securely into the key counter opening.
NOTE
• When the key counter function is used, copies cannot be made
unless the key counter is inserted into the copier. If the key
counter is not inserted securely, “Insert key counter.” appears
on the message display.
(11) Printer board
If the printer board is installed, this copier can be used as a printer.
For more detailed information, see the printer’s operation guide.
Since the network board is equipped, this copier can also be
used as a network printer, allowing access from multiple comput-
ers. The optional printer network kit and hard disk are also avail-
able.
(12) Network scanner
This copier can be used as a network scanner that allows access
from multiple computers.
(13) Fax Kit
If the fax kit is installed, this copier can be used as a fax. For
details, see the operation guide for the fax.