TA Triumph-Adler DC 2025 - Manual (Page 11)

1-3
PRECAUTIONS FOR USE
■ Cautions when using the copier
WARNING
• DO NOT place metallic objects or containers with water
(flower vases, flower pots, cups, etc.) on or near the
copier. This type of situation presents a danger of fire
or electrical shock should they fall inside. ...................
• DO NOT remove any of the covers from the copier as
there is a danger of electrical shock from high voltage
parts inside the copier. ................................................
• DO NOT damage, break or attempt to repair the power
cord. DO NOT place heavy objects on the cord, pull it,
bend it unnecessarily or cause any other type of dam-
age. These types of situations present a danger of fire
or electrical shock. ......................................................
• NEVER attempt to repair or disassemble the copier or
its parts as there is a danger of fire, electrical shock or
damage to the laser. If the laser beam escapes, there is
a danger of it causing blindness. ................................
• If the copier becomes excessively hot, smoke appears
from the copier, there is an odd smell, or any other ab-
normal situation occurs, there is a danger of fire or elec-
trical shock. Turn the power switch OFF (
嘷
) immedi-
ately, remove the power plug from the outlet and con-
tact your service representative. .................................
• If anything harmful (paper clips, water, other fluids, etc.)
falls into the copier, turn the power switch OFF ( 嘷 ) im-
mediately. Next, remove the power plug from the outlet
to avoid the danger of fire or electrical shock. Then con-
tact your service representative. .................................
• DO NOT remove or connect the power plug with wet
hands, as there is a danger of electrical shock. ..........
• ALWAYS contact your service representative for main-
tenance or repair of internal parts. ..............................
CAUTION
• DO NOT pull the power cord when removing it from the
outlet. If the power cord is pulled, the wires may be-
come broken and there is a danger of fire or electrical
shock. (ALWAYS grasp the power plug when removing
the power cord from the outlet.) ..................................
• ALWAYS remove the power plug from the outlet when
moving the copier. If the power cord is damaged, there
is a danger of fire or electrical shock. .........................
• If the copier will not be used for a short period of time
(overnight, etc.), turn the power switch OFF (
嘷
).
If it will not be used for an extended period of time (va-
cations, etc.), remove the power plug from the outlet for
safety purposes during the time the copier is not in use.
• ALWAYS hold the designated parts only when lifting or
moving the copier. .......................................................
• For safety purposes. ALWAYS remove the power plug
from the outlet when performing cleaning operations.
• If dust accumulates within the copier, there is a danger
of fire or other trouble. It is therefore recommended that
you consult with your service representative in regard
to cleaning of internal parts. This is particularly effec-
tive if accomplished prior to seasons of high humidity.
Consult with your service representative in regard to
the cost of cleaning the internal parts of the copier. ...
Other precautions
• DO NOT place heavy objects on the copier or cause
other damage to the copier.
• DO NOT open the front cover, turn off the main switch,
or pull out the power plug during copying.
• During copying, some ozone is released, but the amount
does not cause any ill effect to one’s health. If, how-
ever, the copier is used over a long period of time in a
poorly ventilated room or when making an extremely
large number of copies, the smell may become unpleas-
ant. To maintain the appropriate environment for copy
work, it is suggested that the room be properly venti-
lated.
• When lifting or moving the copier, contact your service
representative.
• Do not touch electrical parts, such as connectors or
printed circuit boards. They could be damaged by static
electricity.
• DO NOT attempt to perform any operations not ex-
plained in this handbook.
• CAUTION: Use of controls or adjustments or perfor-
mance of procedures other than those specified herein
may result in hazardous radiation exposure.