General care and cleaning – RIGOL DM3068 User Manual
Page 9
RIGOL
User’s Guide for DM3068
VII
General Care and Cleaning
General Care:
Do not store or leave the instrument in where the instrument will be exposed to
direct sunlight for long periods of time.
Cleaning:
Clean the instrument regularly according to its operating conditions. To clean the
exterior surface, perform the following steps:
1. Disconnect the instrument from all power sources.
2. Clean the loose dust on the outside of the instrument with a lint- free cloth
(with a mild detergent and water). When clean the LCD, take care to avoid
scarifying it.
CAUTION
To avoid damages to the instrument, do not expose them to liquids which
are corrosive.
WARNING
To avoid injury resulting from short circuit, make sure the instrument is
completely dry before reconnecting into a power source.