Dm3068 overview – RIGOL DM3068 User Manual
Page 11

RIGOL
User’s Guide for DM3068
IX
DM3068 Overview
DM3068 is a 6½ digits, dual display digital multimeter. It is a perfect combination
of basic measurement functions, various math operations as well as any sensor
measurement and can fulfill users’ requirements for high precision, various
functions and auto measurement.
DM3068 provides high-resolution 256 x 64 monochrome LCD, easy-to-use keypad
layout and key backlight as well as operation prompts. It supports RS232, USB,
LAN and GPIB interfaces, USB storage device storage and remote control (web and
SCPI command).
Main Features:
Real 6½ digits reading resolution.
Minimum integration time: 0.006 PLC.
Dual display: synchronously display two kinds of characteristics of the same
signal.
Switch between “Normal” and “Preset” operation modes. The “Preset” mode
can quickly recall the preset configurations.
DC voltage measurement range: -1050 V to 1050 V.
DC current measurement range: -10.5 A to 10.5 A.
AC voltage measurement range: True-RMS, 0 V to 787.5 V.
AC current measurement range: True-RMS, 0 A to 10.5 A.
Resistance measurement range: 0 Ω to 110 M Ω; support 2-wire (2WR) and
4-wire (4WR) resistance measurements.
Capacitance measurement range: 0 F to 110 mF.
Frequency measurement range: 3 Hz to 1 MHz.
Continuity and Diode tests.
User-defined any sensor measurements and three types of temperature
sensor measurements: TC, RTD and THERM.
Plenty of math operations such as STA (MAX, MIN, AVG, ALL), P/F, dBm, dB,
REL as well as real-time tendency graph and histogram display functions.
Enable to store data and configuration in USB storage device.
Plenty of interfaces: USB Device, USB Host, GPIB, RS232 and LAN.
Support the command sets of RIGOL DM3068, Agilent 34401A (including
some extensions) and Fluke 45.