RIGOL DM3068 User Manual
Page 25

RIGOL
User’s Guide for DM3068
1-7
7. Menu Operation Keys
Press any softkey to activate the corresponding menu.
8. Advanced Operation Menus
Set all the measurement parameters.
Perform math operations (statistic, P/F, dBm, dB, REL) on the
measurement results and provide real-time tendency graph and
histogram display.
Provide auto, single, external and level trigger; enable to set the
reading hold function, number of samples per trigger, delay time
before reading and edge of the trigger input signal as well as the
trigger output parameter.
Save the system configuration and measurement data into internal
memory or external USB storage device and recall or delete them
when required.
Select command set for the multimeter; configure the interface
parameters and system parameters; execute self-test and view the
system information and error messages.
Provide help information for common operations and the use method
of the built-in help. The multimeter allows users to quickly recall the
help information about any front panel keys and menu softkeys.
9. Range/Direction Keys
Enable auto range.
Configure the measurement parameters.
Select the cursor position while entering a parameter.
Increase or decrease the measurement range.
Enter desired numeric value while setting a parameter.
Page up or down.