Short-circuit resistance, Short-circuit resistance -46 – RIGOL DM3068 User Manual
Page 88

RIGOL
Chapter 2 Front Panel Operations
User’s Guide for DM3068
2-46
Short-Circuit Resistance
This function only applies to continuity test. When the measured circuit has a
resistance lower than the short-circuit resistance, the circuit is considered as
connected, and the beeper sounds (if sound is on). The default short-circuit
resistance is 10 Ω and the setting is stored in nonvolatile memory.
When continuity test is enabled, press
Conti to enter the following
interface.
Set a desired value using the direction keys. The range is from 1 Ω to 2000 Ω
This manual is related to the following products: