RIGOL DM3068 User Manual

Page 66

RIGOL

User’s Guide for DM3068

2-24

5. Read the measurement value

The multimeter measures the input signal according to the current
measurement settings and displays the value on the screen. Besides, the
multimeter can measure the voltage or current of the signal during the
frequency/period measurement. Press

and then press

and

respectively; the measurement results are as shown in the figures below.

6. Make math operation (advanced)

Users can perform math operation (STA, P/F and REL) on each measurement
reading. For REL operation, the multimeter subtracts the pre-specified value
of REL from the actual measurement result and displays the result. For details,
please refer to “Math Operations”.

7. View history data

Up to 5000 latest measured data can be viewed. Press History to enter the
following interfaces.

 Press Info and use the up and down direction keys to view the

measurement item, measurement range, number of values, maximum,
minimum, average and standard deviation.

 Press List and use the up and down direction keys or the menu softkeys

to view all the measurement results before the last update in table form.

This manual is related to the following products:

M300