RISCO Group ACUS User Manual

Page 45

ACUS Quick Start Guide

Uncontrolled

when

printed

RISCO

Group

11. Click Add Button. A new row is

added in the area. You can add
as many buttons as you want.

12. Select the button name from

the drop-down list.

13. Select the automation that

should be executed when you
click this button on the alarm
alert from the adjacent drop-
down list.

Figure 57: Immediate Buttons

Note: If you add more than one immediate button, you can decide the priority by using the

and

buttons. The buttons will appear in the order that they are arranged.

Note: You may add new buttons to the list. To add new buttons, refer to section

Configuring Alarms and Events

in the

ACUS User Manual

14. Click

. The Automation dialog box appears where you can edit the selected

automation. Refer to section

14 Using Automation

in the

ACUS User Manual

for

details on editing automation.

15. Apart from the automations in the list, if you want to add, edit, duplicate or delete

automation, then click Manage next to the Automations label. The Automation
dialog box appears where you can add, edit, duplicate and delete automations. For
details, refer to

14 Using Automation

in the

ACUS User Manual

16. Click Save. The message appears, “Event Configuration created successfully”.

To configure alarm procedures:

1. Click

the

Alarm

Procedures tab.

2. Click

+ Add Procedure to

add a procedure. A new
row is added.

3. Select the alarm procedure

from the drop-down list.

Figure 58: Alarm Procedures

4. Select the adjacent check box to enable this procedure. The Automations drop-

down list is enabled.

5. Select the automation that should be executed when this procedure is implemented

from the Automation drop-down list.

Alarm
Procedure
drop-down list

Automation
drop-down list