Oki ColorPainter E-64s - Manual (Page 86)

86
Reference: Setting a custom page size
You can set the desired irregular page size.
* If a job is open in Job Editor, close Job Editor.
(1) In RIP-Queue, select .
If the warning above appears, click .
(2) Select the Page Sizes tab and
click Add.
(3) Enter Name, Width and Height then
click .
(4) The registered page will appear in the
RIP-Queue page sizes field.
* Even if you use a different name, you cannot use two or more custom page sizes with the same width and height.
(The custom size can be registered, but it cannot be selected when used)
In this situation, slightly change the height.