Oki ColorPainter E-64s - Manual (Page 128)

20
To add or configure a cutter in CUT-Server:
1. When you start CUT-Server for the first time, you are prompted to select a cutter using the drop-down
menu.
2. After selecting the cutter, click OK . (“Graphtec CE6000” is selected in this example.)
3. Select the connection port in Port Settings and then click Setup. After configuring the selected port,
click Close to close the window.
(A list of devices is displayed when using USB connection. In this case, select a cutter and click Close.)
* Auto-forwarding
When Auto-forwarding is selected, cutting is performed automatically after the cut job has
been received in the queue.
After cutting, the job is sent to the archive.