Oki ColorPainter E-64s - Manual (Page 140)

32
Importing SVG files to CUT-Server:
1.
Click Open in CUT-Server.
2. Select the cutter you want to use in the Select a cutter drop-down menu at the right of the Open
window.
(“Graphtec CE6000” is selected in this example.)
3. Select an SVG file and a cutter, and then click Open.
4. After the job has been loaded, it is displayed at the left of the screen. Click the job at the left of the
screen to verify the cut paths.
The settings for cutting only files are displayed in the Cut File Tools panel.