Precision Digital PD6300 - Manual (Page 89)

Model PD6300 Pulse Input Rate/Totalizer Instruction Manual
89
Alphabetical List of Display Functions & Messages
Display Parameter Action/Setting Description
20 nmA 20 mA output Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
4 nmA 4 mA output Enter mA output value read by milliamp
meter with at least 0.001 mA resolution
999999 Flashing
display Overrange condition
AcH Acknowledge Acknowledge relays
Act 1 Action 1 Set relay 1 action
Alnm 1 Alarm 1 Assign digital output to Alarm 1 – 8
Altern Alternate Set relay for alternation control (relays as-
signed to rate)
A-nman Auto-manual Set relay for automatic & manual reset
any time
Aout Analog output Analog output scaling
Aoutpr Analog output
programming Analog output programming
Asign1 Assign 1 Relay 1 assignment
Assign Assignment Assign relays to rate, total, or grand total
Auto Automatic Press Enter to set meter for automatic op-
eration
Auto Automatic For automatic reset
baud Baud rate Select baud rate
big Big display Press Enter to assign the Main display
parameter (default: PV or rate)
Big Hi Max on big dis-
play Assign digital input to display max on the
main display
Big HL Max/min big
display Assign digital input to toggle max/min on
the main display
Big Lo Min on big dis-
play Assign the digital input to display min on the
main display
Cal Calibrate Enter the Calibrate menu