Precision Digital PD6300 - Manual (Page 71)

Model PD6300 Pulse Input Rate/Totalizer Instruction Manual
71
Advanced Features Menu & Display Messages
The following table shows the functions and messages of the Advanced
Features
menu in the order they appear in the menu.
Display Parameter Action/Setting
Gate Gate Enter Gate function menu
Lo G Low gate Program Low gate value
Hi G High gate Program High gate value
filter Filter Enter the Filter menu
Lo Spd Low speed Set the contact de-bounce filter value
Hi Spd High speed Select high speed filter
seriAl Serial Set serial communication parameters
SlaveId Slave ID Set slave ID or meter address
baud Baud rate Select baud rate
Tr dLY Transmit delay Set transmit delay for serial communication
Parity Parity Select parity
Even, Odd, or None with 1 or 2 stop bits
t-byt Time byte Set byte-to-byte timeout
SelEct Select Enter the Select menu (function, cutoff, out)
Functn Math Function Select linear only, other functions are not
applicable to pulse input
Linear Linear Set meter for linear function and select
number of linearization points
No PtS Number of
points Set meter for 2 to 32-point linearization
CutofF Cutoff Set low-flow cutoff
AoutPr Analog output
programming Program analog output parameters
Source Source Select source for the 4-20 mA output