Precision Digital PD6300 - Manual (Page 32)

Model PD6300 Pulse Input Rate/Totalizer Instruction Manual
32
Display Parameter Action/Setting Description
Assign Assignment Assign relays to rate, total, or grand total
Asign1 Assign 1 Relay 1 assignment
rATE Rate Assign relay to rate
totAL Total Assign relay to total
G total Grand total Assign relay to grand total
RLY 1 Relay 1 Relay 1 setup
Act 1 Action 1 Set relay 1 action
Auto Automatic Set relay for automatic reset
A-nman Auto-manual Set relay for automatic & manual reset
any time
LatCH Latching Set relay for latching operation (relays
assigned to rate)
Lt-CLr Latching-
cleared Set relay for latching operation with ma-
nual reset only after alarm condition has
cleared (relays assigned to rate)
Altern Alternate Set relay for alternation control (relays
assigned to rate)
Sampl Sampling Set relay for sampling operation
OFF Off Disable relay and front panel status LED
(Select Off to enable Interlock feature)
Set 1 Set 1 Program set point 1
RSt 1 Reset 1 Program reset point 1
RLY 2 Relay 2 Relays 2-8 setup
Note: Relays 5-8 are shown, only if ex-
pansion relay module is installed.
FaiLSF Fail-safe Enter Fail-safe menu
FLS 1 Fail-safe 1 Set relay 1 fail-safe operation
on On Enable fail-safe operation