Precision Digital PD6300 - Manual (Page 33)

Model PD6300 Pulse Input Rate/Totalizer Instruction Manual
33
Display Parameter Action/Setting Description
off Fail-safe off Disable fail-safe operation
DeLAY Delay Enter relay Time Delay menu
DLY 1 Delay 1 Enter relay 1 time delay setup
On 1 On Set relay 1 On time delay
OFF 1 Off Set relay 1 Off time delay
Aout Analog output Enter the Analog output scaling menu
Dis 1 Display 1 Program display 1 value
Out 1 Output 1 Program output 1 value (e.g. 4.000 mA)
Dis 2 Display 2 Program display 2 value
Out 2 Output 2 Program output 2 value (e.g. 20.000 mA)
prog Program Enter the Program menu
factor K-factor
Scaling Programs unit to convert input pulse to
rate in engineering units
sCalE Scale Enter the Scale menu
Cal Calibrate Enter the Calibrate menu
Inp 1 Input 1 Calibrate input 1 signal or program input 1
value
Dis 1 Display 1 Program display 1 value
Inp 2 Input 2 Calibrate input 2 signal or program input 2
value (up to 32 points)
Dis 2 Display 2 Program display 2 value (up to 32 points)
Error Error Error, calibration not successful, check
signal or programmed value
T tb Total time
base Program total time base
T CF Total conver-
sion factor Program total conversion factor