MINOURA P-600AL-5S - Manual

P-600AL-5S "Closet-Cyclist"
– instructions manual
(ver.5.2 2015/5)
!
Features & Benefits
• Save vast amounts of space by hanging the bicycles
vertically from the front wheel.
• Alloy pillar is durable, light weight and rust proof.
• You can choose from two different styles on the base
leg layout; K-style for more effective space saving by
placing just next to a wall, or X-style for added better
stability.
• Newly designed alloy clamp holds the attachment
securely and easily to adjust its height.
• Top hook is padded with soft plastic to prevent damage
to the rim . Its unique dual hook design avoids
twisting the bike while hanging down.
• Holds a total of 40 kg (max 20 kg per side).
Cautions
• For normal 2-wheel bicycle only. Tandem,
recumbent, long tail bike and DH bike with super
long suspension fork may not be used on this stand
in the case if the rear wheel has reached the floor
even if you set the top hook at the highest position.
• Set the stand on an even and horizontal floor.
Adjust each foot precisely to insure each of the
foot's four points touch the floor evenly.
• Be sure to keep the weight on the stand balanced.
A heavy bike on one side without a similar weight
bike on the other side may cause the stand to tip.
• The clamp is made of strong but lightweight
material.
Do not overtighten or the bolt may come out of the
housing, ruining the clamping mechanism.
• Follow the correct order for tightening the screws.
Failure to do so may lead to improperly tightened
screws.
• Screw the bolt by your finger at least in the first 3 –
4 rotations in order to prevent wrong screwing. After
confirming the bolt is screwed properly without any
problem, you can now use tool for tightening.
• To prevent the stand from tipping over backwards,
the stand should be placed next to a wall when you
choose K-style leg combination.
• The rear wheel hook is a guide, not a lock. It is there
to help maintain balance.
(Hanging 2 road bikes image
in K-style leg)
Contact
MINOURA JAPAN MINOURA NORTH AMERICAN TECH CENTER
(for ALL customers, including Canada) (for U.S. residents ONLY)
1197-1 Godo, Anpachi, Gifu 503-2305 Japan Mon - Fri, 9 am - 5 pm (PCT)
Fax +81-584-27-7505 Phone 1-510-538-8599 / Fax 1-510-538-5899
[email protected] / www.minoura.jp [email protected]
If you have question or problem on this product, please contact the shop where you originally purchase this product
or the distributor in your country first. The distributor information can be found on our web site. Only when you
cannot obtain enough service from them, you can contact Minoura directly.
Made in Japan