beautypg.com

MINOURA HMS-10 User Manual

Hms-10

background image

Important Notes

!

Bicycle Maintenance Stand

HMS-10

instructions manual

If you have any questions or need help, you should contact the

dealer where you purchased

or the Minoura

distributor in your country first. Only when you cannot get enough service,

you can contact us.

MINOURA JAPAN

(for ALL customers)

MINOURA North America

(for U.S. residents ONLY)

1197-1 Godo, Anpachi, Gifu 503-2305 Japan

Hayward, Califiornia, U.S.A.

Phone: +81-584-27-3131 / Fax: +81-584-27-7505

Phone: 1-510-538-8599 / Fax: 1-510-538-5899

Email: [email protected] / Web: www.minoura.jp

Email: [email protected]

Made in Japan

The HMS-10 is designed for easy

operation.

All you do is place the saddle on the

U-shaped hook. This holds the bike

easily so you can reach the drivetrain

easily.

Very quick and simple compared to a

standard repair stand.

The U-shaped hook is positioned 1,080

mm from the floor and works with

almost any kind of bicycle.

• For normal sporting bicycle only. Tandems, recumbent bikes,

long tail bikes, too heavy E-bike or DH bikes, and the bike

without either wheel (bad weight balance) may not be used

safely.

• Remove any accessories such as saddle bag or tail light from

the seatpost.

In case of using an aero type seatpost, we strongly recommend

you to put soft material between the saddle holder hook and the

thin fin side of the seatpost to avoid possible damage due to

strong pressure.

• Do not tighten the U-shaped saddle holder too much. The holder

should remain slightly loose so the bike can be maneuvered and

the front wheel can touch the floor for stability. Over tightening

may cause the stand to become unstable and possibly fall

over.

• The base is a triangle design and not meant to be pushed

backwards.

• Performing heavier jobs such as bottom bracket work

require that the bicycle be put on the ground, not in the

stand. The HMS-10 is for light duty work only.

• Make sure the legs are are securely fixed in the correct

position before placing your bike in the stand. Failure to do

so may cause the bike to fall out of the stand.

• Minoura is not responsible for misuse or accidents caused

by not understanding the directions.

Contact

(HMS-10 with a bike)

Front tire should be touching the floor

(Ver.2.0 2015/4)

The legs fold down without the

need for tools so you can easily

store the stand when not is use.

Minoura provides a 1 year

warranty from the date of your

purchase for the HMS-10 that

covers manufacturer defects, not

normal wear and tear or abuse.

Please see the attached warranty card

for details. And be sure to check our

web site for updated information.