MINOURA MPT-200S - Manual

Universal Base Stand MPT-200S instructions manual
(ver.2.0 2014/8)
!
About MPT-200S
● MPT-200S is a multi-use base stand
that accepts many of Minoura's
accessory attachments.
● You can choose the leg pattern from
K-style or X-style.
K-Style allows set-up next to a wall only
while X-Style offers more flexibilty in
where the stand and attachments can
be placed.
● The pillar is light weight and durable
made of 45mm diameter light alloy
tubing.
Choose the attachment for 45mm size.
Cautions
● Place the stand only on a level, stable
floor. Adjust all four feet to level the
stand.
● When using the stand in the K-Style
layout, place the stand as close to the
wall as possible to prevent the stand
from tipping over backwards.
Do not install the attachments on the
back side of the stand.
Contact
MINOURA JAPAN MINOURA NORTH AMERICAN TECH CENTER
(for ALL customers, including Canada) (for U.S. residents ONLY)
1197-1 Godo, Anpachi, Gifu 503-2305 Japan Mon - Fri, 9 am - 5 pm (PCT)
Fax +81-584-27-7505 Phone 1-510-538-8599 / Fax 1-510-538-5899
[email protected] / www.minoura.jp [email protected]
If you have question or problem on this product, please contact the shop where you originally purchase this product
or the distributor in your country first. The distributor information can be found on our web site. Only when you
cannot obtain enough service from them, you can contact Minoura directly.
Made in Japan
(Image: MPT-200S in K-style leg)