MINOURA SS-700 - Manual

Bicycle Maintenance & Display Stand – instructions manual
MINOURA JAPAN
1197-1 Godo, Anpachi, Gifu 503-2305 Japan
Phone: +81-584-27-3131 / Fax: +81-584-27-7505
Email: [email protected]
www.minoura.jp
SS-700
Important Notes
• Only for normal 2-wheel bicycle with 125 – 140mm rear hub. Any internal transmission rear hub
cannot be used on SS-700.
• Nut type hub bike frame require replacing the left side coupling bolt to the optional longer one.
Old narrow (120mm) bike frame with quick release skewer cannot be mounted even with this
optional bolt. It requires spacing shims separately.
• We strongly suggest you use the supplied skewer to guarantee a proper fit with our trainer.
• SS-700 cannot be upgraded to be an indoor bicycle trainer by adding a resistance unit.
If you have any questions or need help, you should contact the dealer where you purchased or the Minoura
distributor in your country first. The distributor can be found on our web site.
Only when you cannot get enough service from them, you can contact us;
Contact
S p i n n i n g - S t a n d
(Ver.2.0 2015/04)
Made in Japan
Warranty Period 1 year from purchase
Applicable Tire Size up to 700 x 45c (ETRTO 47-622)