MINOURA MoZ-Roller User Manual
Vergo tf-1, Instructions manual, Warranty period : 1 year

VERGO TF-1
instructions manual
(ver.1.1 2015/5)
●VERGO-TF is a an in-vehicle bike mounting base and should not be used for any other purpose.
●For normal 2-wheel bike only. Not suitable for heavy electric, downhill or tandem bikes.
●Standard 9mm quick release skewer and 15mm thru type axle can be used on VERGO-TF. 20mm thru axle for
downhill bike cannot be mounted. A plain front fork for standard nut type axle is compatible.
●When using 9mm quick release skewer, use the supplied skewer. When using 15mm thru type axle, remove the
sleeves from the Fork Mount and use your own axle.
●The Fork Mount in the kit is for the standard 100mm width hub only. Any other sizes cannot be mounted.
●Drive carefully when transporting bikes with the VERGO-TF. Do not fix bikes to the floor and be careful when
accelerating, braking or driving recklessly. Your bikes and vehicle may sustain damage so we recommend you tie
the bikes down with a strap.
●When closing the back gate door, make sure the bike will not hit the rear window.
●TF-1 has much shorter Rail Bar that means the total stability of TF-1 is much weaker than other versions. You must use a tie-
down belt to hold the bike securely. Don't leave just put on the floor.
Warranty Period : 1 year
For more details, read the attached
"
Minoura Limited Warranty Policy"
card.
Please refer to our website for any
updated information.
[ In-Use Style ]
Important Notes
Contact
If you have any questions or need help, you should contact the
dealer where you purchased or the
Minoura
distributor in your country first. Only when you cannot get enough service, you can contact us.
MINOURA JAPAN
(for ALL customers)
MINOURA North America
(for U.S. residents ONLY)
1197-1 Godo, Anpachi, Gifu 503-2305 Japan
California, U.S.A.
Phone: +81-584-27-3131 / Fax: +81-584-27-7505
Phone: 1-510-538-8599 / Fax: 1-510-538-5899
Email: [email protected] / Web: www.minoura.jp
Email: [email protected]
Made in Japan