MCZ Club AIR User Manual
Page 30

PELLET STOVES
Chapter 3
INSTALLATION AND USE MANUAL
page
30
Installation and assembly
Technical service - Rights reserved MCZ Group S.p.A. - Reproduction prohibited
3.4.6. Assembling the frontal/side panel and top on the Toba stove
The Toba stove has three parts requiring assembly:
o Front panel in:
Ceramic
Steatite
o Sides made of steel
o Top
The front panel
made in ceramics/ steatite
is delivered with the
ceramics secureed onto the iron frame, therefore it is sufficient to
secure it onto the stove structure using the two upper screws and the
two lower screwsi (P).
P
P
P
P
P
P
P
P
The steel side panels are secureed to the structure of the stove by
sliding the apposite plugs A-B found on the lower part of the panels
into the holes (a) found on the base of the stove. Once in position
secure the side panel onto to upper part of the stove using the two
screws (b-c).