Epson DFX-9000 - Manual (Page 98)

98 Control Panel
❏ Never cut labels, continuous paper with labels, and
overlapping multi-part forms.
❏ If you set the cutting method through the printer driver’s
paper source setting, it overrides Auto cut mode.
Auto cut/back mode
This function is available only when the optional perforation
cutter (#C81570X) is installed in the printer. When you turn on
this feature, the printer automatically cuts each page at the
perforation and feeds the paper to the top-of-form position while
it is printing.
Overlapping multipart forms
When this setting is set to On, you can print on overlapping
multi-part forms that vary in thickness.
Continuous forms with labels
When this setting is set to On, you can print on continuous forms
with labels. You can set the label position in the default-settings
mode. See “Adjusting the label position” on page 33 for details.
Skip over binding
When this setting is set to On, the print head avoids the binding
area along the right and left edges of multi-part forms during
paper feeding. This makes paper feeding easier and prevents
paper jams.
Get IP address
This setting is available only when the optional Print Server is
installed. You can select the method of getting the IP address.
Select Panel to get the IP address from the control panel. See
“Setting the IP address from the control panel” on page 165 for
details. For information on the settings when this feature is set to
Auto
or Ping, see a manual for the Print Server that you use.